Picture

RG-CS86-12XMG4VS-UP 12-Port Multi-GE PoE Switch with Cloud Management, Full 1/2.5/5/10GE, 25G Uplink

Diverse access rates of 10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps and 4 x 25GE SFP28 ports for uplink, enabling flexible networking and high-performance campus networks

Models

RG-CS86-48MG4VS2QXS-UPD

48 x 5GE Ethernet ports, 4 x 25GE SFP28 ports, 2 x 40GE QSFP+ ports

RG-CS86-24XMG4XS4VS-UPD

24 x 10GE Ethernet ports, 4 x 10GE SFP+ ports, 4 x 25GE SFP28 ports

RG-CS86-24MG4VS-UP

24 x 5GE Ethernet ports, 4 x 25GE SFP28 ports

RG-CS86-12XMG4VS-UP

12 x 10GE Ethernet ports, 4 x 25GE SFP28 ports

Seri

RG-CS86 Series Multi-GE Switch

Datasheet Sales Enquiry

Fitur Penting

12 x 10GE/5GE/2.5GE/GE/100M Base-T Ethernet ports for access, 4 x 25GE SFP28 ports for uplink, meeting high-bandwidth campus network demands
Hardware-level multi-protection, ensuring service continuity
VSU, realizing flexible networking and high performance
Network security policies and real-time monitoring, enhancing network robustness
Intelligent speed regulation and auto sleeping, reducing energy consumption and noise
Diverse network management modes, enabling simple maintenance

Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Features

RG-CS86-12XMG4VS-UP
10GE Multi-rate Access Switch

12 x service ports: 10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps access
4 x 25GE SFP28 ports for uplink, enabling flexible networking
High-power PoE++, offering up to 90 W output and adapting to services in Wi-Fi 6E and Wi-Fi 7 eras

Hardware Redundancy, Guaranteed Service Continuity and Network Connectivity

Hardware-Level Boot Redundancy

Optical Port Fault Isolation

Hot-Swappable Power Modules + Intelligent Fan Modules

Two Flash chips are used to store the system Boot program for hardware-level Boot redundancy, avoiding device failure caused by a failed Flash chip.

VSU Virtualization, Flexible Networking and High Performance

Millisecond Failover

High Scalability

Simplified Networking

Connected by an aggregate link, the VSU virtual system and peripherals switch links in milliseconds to ensure service continuity in case of a failure.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

CPP protects the CPU from data attacks to ensure CPU stability under high usage, achieving significant improvement in the device's security performance.

Intelligent Speed Regulation and Auto Sleeping, Reducing Energy Consumption and Noise

Intelligent fan speed regulation based on monitored component temperatures, saving energy
Auto service port sleeping, reducing device power consumption.

Ruijie Cloud and Diverse Management Modes
Make Your Business Easy

Ruijie Cloud

Flexible Management Modes

SON, zero touch provisioning on the cloud

Configure VLANs on Ruijie Cloud APP

Monitor switch statistics at anytime anywhere

Ease of maintenance, saving onsite labor and cost

Specifications

Hardware Specifications

Multi-GE Switch

Hardware Specifications	RG-CS86-24MG4VS-UP	RG-CS86-48MG4VS2QXS-UPD	RG-CS86-24XMG4XS4VS-UPD	RG-CS86-12XMG4VS-UP
Interface Specifications
Fixed port	24 x 100M/1000M/2.5GE/5GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 ports	48 x 100M/1000M/2.5GE/5GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 ports + 2 x 40GE QSFP+ ports	24 x 100M/1000M/2.5GE/5GE/10GE electrical ports with auto-negotiation 4 x 1GE/10GE SFP+ ports 4 x 10GE/25G SFP28 ports	12 x 100M/1000M/2.5GE/5GE/10GE electrical ports with auto-negotiation 4 x 10GE/25G SFP28 ports
Fan module	2 fixed fans	3 modular fans	3 modular fans	2 fixed fans
Power module	1 Built-in power module	2 replaceable hot-swappable power supply slots	2 replaceable hot-swappable power supply slots	1 Built-in power module
Fixed management port	1 x MGMT port 1 x console port 1 x USB port	1 x MGMT port 1 x console port 1 x USB port	1 x MGMT port 1 x console port 1 x USB port	1 x MGMT port 1 x console port 1 x USB port
System Specifications
Packet forwarding rate	327 Mpps	625 Mpps	565 Mpps	327 Mpps
Switching capacity	440 Gbps	840 Gbps	760Gbps	440 Gbps
MAC address table size	32,768
ARP table size	16,000
Number of IPv4 unicast routes	16,000
Number of IPv4 multicast routes	4,000
Number of IPv6 unicast routes	16,000
Number of IPv6 multicast routes	2,000
Number of ACEs	Ingress: 2,500 Egress:1,000
Number of VSU members	2
Dimensions and Weight
Dimensions (W x D x H)	442 × 220 × 43.6 mm (17.40 × 29.92 × 6.89 in.) , 1 RU	442 × 220 × 43.6 mm (17.40 × 29.92 × 6.89 in.) , 1 RU	442 × 220 × 43.6 mm (17.40 × 29.92 × 6.89 in.) , 1 RU	442 × 220 × 43.6 mm (17.40 × 29.92 × 6.89 in.) , 1 RU
Weight	3.65 kg (8.82 lbs)	6.11 kg (13.47 lbs)	6.11 kg (13.47 lbs)	3.65 kg (8.82 lbs.)
CPU and Storage
CPU	ARM processor, 1.25 GHz	ARM processor, 1.25 GHz	ARM processor, 1.25 GHz	ARM processor, 1.25 GHz
Flash memory	1 GB	1 GB	1 GB	1 GB
BootROM	16 MB	16 MB	16 MB	16 MB
SDRAM	1 GB	1 GB	1 GB	1 GB
Data packet buffer	4 MB	4 MB	4 MB	4 MB
Power Supply and Consumption
Maximum power consumption	Without PoE: < 120 W (Total power consumption of all modules) Full PoE load: < 370 W	Without PoE: < 240 W (Total power consumption of all modules) Full PoE load: < 1600 W	Without PoE: < 120 W (Total power consumption of all modules) Full PoE load: < 1650 W	Without PoE: < 120 W (Total power consumption of all modules) Full PoE load: < 370 W
Maximum output power	460W	RG-PA600I-P-F: 600 W RG-PA1000I-P-F: 1000 W (Input Voltage: 176 V AC to 290 V AC or 190 V DC to 290 V DC) 930 W (Input Voltage: 90 V AC to 176 V AC, 176 V AC not included)	RG-PA600I-P-F: 600 W RG-PA1000I-P-F: 1000 W (Input Voltage: 176 V AC to 290 V AC or 190 V DC to 290 V DC) 930 W (Input Voltage: 90 V AC to 176 V AC, 176 V AC not included)	460W
Rated Input Voltage	Built-in power module Rated voltage range: 100 V AC to 240 V AC	Available model: RG-PA600I-P-F Rated voltage range: 100 V AC to 240 V AC Available model: RG-PA1000I-P-F Rated voltage range: 100 V AC to 240 V AC	Available model: RG-PA600I-P-F Rated voltage range: 100 V AC to 240 V AC Available model: RG-PA1000I-P-F Rated voltage range: 100 V AC to 240 V AC	Built-in power module Rated voltage range: 100 V AC to 240 V AC
Maximum input voltage	Built-in power module Maximum voltage range: 90 V AC to 264 V AC	Available model: RG-PA600I-P-F Maximum voltage range: 90 V AC to 264 V AC Available model: RG-PA1000I-P-F Maximum voltage range: 90 V AC to 264 V AC	Available model: RG-PA600I-P-F Maximum voltage range: 90 V AC to 264 V AC Available model: RG-PA1000I-P-F Maximum voltage range: 90 V AC to 264 V AC	Built-in power module Maximum voltage range: 90 V AC to 264 V AC
PoE-capable Port	Ports 1 to 24 support PoE/PoE+ and HPoE power supply Maximum output power of a HPoE-capable port: 90 W	Ports 1 to 48 support PoE/PoE+ power supply Ports 1 to 24 support HPoE power supply Maximum output power of a HPoE-capable port: 90 W	Ports 1 to 24 support PoE/PoE+ and HPoE power supply Maximum output power of a HPoE-capable port: 90 W	Ports 1 to 12 support PoE/PoE+ and HPoE power supply Maximum output power of a HPoE-capable port: 90 W
Environment and Reliability
MTBF	22.18 years	27.02 years	22.18 years	22.18 years
Primary airflow	Front/Left-to-rear airflow	Front/Left-to-rear airflow	Front/Left-to-rear airflow	Front/Left-to-rear airflow
Operating Temperature	0°C to 45°C (32°F to 113°F)	0°C to 45°C (32°F to 113°F)	0°C to 45°C (32°F to 113°F)	0°C to 45°C (32°F to 113°F)
Storage Temperature	–40°C to +70°C (–40°F to +158°F)	–40°C to +70°C (–40°F to +158°F)	–40°C to +70°C (–40°F to +158°F)	–40°C to +70°C (–40°F to +158°F)
Operating Humidity	10% RH to 90% RH (non-condensing)	10% RH to 90% RH (non-condensing)	10% RH to 90% RH (non-condensing)	10% RH to 90% RH (non-condensing)
Storage Humidity	5% RH to 95% RH (non-condensing)	5% RH to 95% RH (non-condensing)	5% RH to 95% RH (non-condensing)	5% RH to 95% RH (non-condensing)
Surge Protection	6 kV	6 kV	6 kV	6 kV
Temperature Monitoring	Temperature alarm	Temperature alarm	Temperature alarm	Temperature alarm

Software Specifications

Software Specifications	RG-CS86-24MG4VS-UP	RG-CS86-48MG4VS2QXS-UPD	RG-CS86-24XMG4XS4VS-UPD	RG-CS86-12XMG4VS-UP
Ethernet switching	Jumbo frame (maximum length: 9216 bytes)
	IEEE 802.1Q (supporting 4K VLANs)
	Voice VLAN
	Super VLAN, Private VLAN
	MAC VLAN, Port based VLAN, Protocol based VLAN, IP-Subnet based VLAN
	GVRP
	Basic QinQ Flexible QinQ
	STP, RSTP, and MSTP
	ERPS (G.8032)
	LLDP/LLDP-MED
	LACP (IEEE 802.3ad)
IP service	ARP
	DHCP client, DHCP relay, and DHCP server
	DHCP snooping
	DNS
	DHCPv6 client and DHCPv6 relay
	DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
IP Routing	Static routing
	RIP and RIPng
	OSPFv2, OSPFv3, IS-ISv4, ISv4, and IS-ISv6
	BGP4 and BGP4+
	IPv4 and IPv6 PBR
	ECMP
Multicast	IGMP v1/v2/v3, and IGMP proxy
	IGMP v1/v2/v3 snooping
	PIM-DM, PIM-SM, and PIM-SSM
	MSDP
	MLD v1/v2
	MLD snooping v1/v2
	PIM-SMv6 and PIM-SSM v6
ACL and QoS	Standard IP ACLs Extended IP ACLs Extended MAC ACLs Time-based ACLs Expert-level ACLs ACL80 IPv6 ACL
	Port traffic rate limiting
	Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	802.1p/DSCP/ToS traffic classification Eight priority queues per port
Security	Multiple AAA modes
	RADIUS and TACAS+
	Port-based and MAC-based 802.1x authentication
	Web authentication
	HTTPS
	SSHv1, SSHv2
	Global IP-MAC binding
	IP source guard
	SAVI
	CPP and NFPP
	Strict and loose RPF uRPF ignoring default routes
Reliability	REUP, RLDP, DLDP
	IPv4 VRRP v2/v3 and IPv6 VRRP
	BFD
	GR for RIP, OSPF, BGP
	1+1 power redundancy
	Hot swapping of power and fan modules
Device virtualization	Virtual Switching Unit (VSU)
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFLOW
	NTP and SNTP
	FTP and TFTP
	SNMP v1/v2/v3
	RMON (1, 2, 3, 9)
	NETCONF
	CWMP (TR-069) standard protocol
	gRPC
	Cloud and SON
PoE	IEEE 802.3af, 802.3at and 802.3bt Uninterruptible power supply upon hot start Port priority

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Software and Configuration

Order Information

Follow the steps to order a RG-CS86 multi-GE switch:

Select a model of RG-CS86 series switches. The device is fully equipped with fan modules that do not need to be purchased separately.
Select power modules based on switch models. At least one power module is required.
Select optical modules based on optical interfaces of the switch.

Models marked with asterisks (*) in the ordering information are available later.

Switch and Power Module

Model	Description
RG-CS86-24MG4VS-UP	24 x 100M/1000M/2.5GE/5GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 ports ,support PoE/PoE+/PoE++ fixed AC power supply and fan
RG-CS86-48MG4VS2QXS-UPD	48 x 100M/1000M/2.5GE/5GE electrical ports with auto-negotiation 4 x 10GE/25GE SFP28 + 2 x 40GE QSFP+ ports, support PoE/PoE+/PoE++(25-48 ports only support PoE/PoE+) 2 modular power supply slots (at least one RG-PA600I-P-F/ RG-PA1000I-P-F power module needed,no power module in default),3 modular fan slots (3 fan modules are equipped by default)
RG-CS86-24XMG4XS4VS-UPD	24 x 100M/1000M/2.5GE/5GE/10GE electrical ports with auto-negotiation, 4 x 1GE/10GE SFP+ ports , 4 x 10GE/25GE SFP28 ports,support PoE/PoE+/PoE++ 2 modular power supply slots (at least one RG-PA600I-P-F or RG-PA1000I-P-F power module needed,no power module in default),3 modular fan slots (3 fan modules are equipped by default)
RG-CS86-12XMG4VS-UP	12 x 100M/1000M/2.5GE/5GE/10GE electrical ports with auto-negotiation, 4 x 10GE/25GE SFP28 ports,support PoE/PoE+/PoE++ fixed AC power supply and fan
RG-PA600I-P-F	600 W AC power module
RG-PA1000I-P-F	1000 W AC power module

GE Optical Module

Model	Description
Mini-GBIC-GT	1000BASE-GT mini GBIC module
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, SM (850 nm, 500 m, LC).
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, SM (1310 nm, 10 km, LC)
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, SM (1310 nm, 40 km, LC)
MINI-GBIC-ZX80-SM1550	1000BASE-ZX80, SFP transceiver, SM (1550 nm, 80 km, LC)
GE-SFP-LX20-SM1310-BIDI	SFP BIDI Transceiver-TX1310/RX1550, 20 km, LC
GE-SFP-LX20-SM1550-BIDI	SFP BIDI Transceiver-TX1550/RX1310, 20 km, LC
GE-SFP-LH40-SM1310-BIDI	SFP BIDI Transceiver-TX1310/RX1550, 40 km, LC
GE-SFP-LH40-SM1550-BIDI	SFP BIDI Transceiver-TX1550/RX1310, 40 km, LC

10GE Optical Module

Model	Description
XG-SFP-SR-MM850	10GE SR, SFP+ transceiver, LC, 850-nm wavelength, applicable to SFP+ port 62.5 μm/125 μm : 33 m over MMF 50 μm/125 μm: 66 m over MMF 2000 MHz·km: 300 m over MMF
XG-SFP-LR-SM1310	10GE LR, SFP+ transceiver, LC, 1310-nm wavelength, 10 km over SMF, applicable to SFP+ ports
XG-SFP-ER-SM1550	10GE ER, SFP+ transceiver, LC, 1550-nm wavelength, 40 km over SMF, applicable to SFP+ ports
XG-SFP-AOC1M	10GE SFP+ active optical cable, 1 m, including one cable and two interface modules
XG-SFP-AOC3M	10GE SFP+ active optical cable, 3 m, including one cable and two interface modules
XG-SFP-AOC5M	10GE SFP+ active optical cable, 5 m, including one cable and two interface modules

25GE Optical Module

Model	Description
VG-SFP-SR-MM850	25GE SR, SFP28, 850-nm wavelength, 100 m over MMF
VG-SFP-LR-SM1310	25GE LR, SFP28, 1310-nm wavelength, 10 km over SMF
VG-SFP-AOC5M	25GE SFP+ active optical cable, 5 m, including two modules

40GE Optical Module

Model	Description
40G-QSFP-SR-MM850	40GE SR, QSFP+ transceiver, applicable to QSFP+ ports OM3 and OM4 MMF, MPO, 8-core, 850-nm wavelength, 100 m over OM3 MMF or 150 m over OM4 MMF
40G-QSFP-LR4 SM1310	40GE LR4, QSFP+ transceiver, LC, 1310-nm wavelength, 2-core, 10 km over SMF, applicable to QSFP+ ports
40G-AOC-5M	40GE QSFP+ active optical cable, 5 m, including one cable and two interface modules
40G-AOC-10M	40GE QSFP+ active optical cable, 10 m, including one cable and two interface modules

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.