Picture

RG-AP880-AR, Wi-Fi 6 Quad-Radio 7.780 Gbps High-Density Indoor Access Point, 5Gbps Combo SFP Port

Indoor high-density scenarios in the higher education, government, general education, finance, and business sectors

Models

RG-AP880-AR

Wi-Fi 6, 7.780 Gbps, 10 Streams

Datasheet Sales Enquiry

Fitur Penting

5G optical port and 5G electrical port for flexible networking
Upgraded to Wi-Fi 6, a combined data rate of up to 7.780 Gbps
Al radio for intelligent guidance of STA roaming, ensuring service continuity
Independent Al Radio for security protection, delivering better experiences and higher security
Unified WIS cloud management, intelligent O&M

Spesifikasi Penting
Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Spesifikasi Penting View More

Features

Wi-Fi 6 High-Density Indoor AR Series AP
RG-AP880-AR

Maximum Data Rate
7.780 Gbps

All-Optical i-Share+
Solution

Independent AI Radio

10 Spatial Streams

Bluetooth 5.1

5G Optical Port and 5G Electrical
Port for Flexible Networking

One 5G optical port supports higher bandwidth. With Ruijie All-Optical i-Share+ Solution, this port helps achieve all-optical gigabit access in rooms.
One 5G electrical port is also provided to meet existing networking requirements.

Upgraded to Wi-Fi 6
Achieving a Combined Data Rate of Up to 7.780 Gbps

High Concurrency

OFDMA and MU-MIMO are introduced to
ensure stable access of multiple STAs

Low Latency

OFDMA is applied to transmit data to
multiple STAs simultaneously. The
latency is as low as 20 ms.

High Security

The next-generation wireless encryption
protocol WPA3 greatly improves the
security of wireless connection.

High Speed

With 1024-QAM modulation, the
data transmission rate is 25%
higher than 802.11ac.

Al Radio for Intelligent Guidance of STA
Roaming, Ensuring Service Continuity

The built-in Al Radio independently scans STA status, and reports the scanning result of neighbor APs to ACs. The ACs then guide STAs to quickly access an AP with better signals.
In this way, STAs can maintain a good signal quality during movement, thereby achieving low latency, no lagging, and service continuity in roaming.

Traditional Settled AP

Average roaming latency: 300ms
Packet loss rate: 2%

RG-AP880-AR

Average roaming latency: < 30ms
Packet loss rate: < 0.5%

Independent AI Radio for Secure Scanning
Safeguarding Wireless Network Security

Different from traditional, periodic, single-radio scanning with blind spots, AI Radio performs independent, real-time, full-radio, secure scanning.
The secure scanning does not occupy communication radio resources or affect wireless performance, ensuring good network experiences.

AI Radio

Traditional AP

24/7 real-time scanning

5G/2.4G full-radio scanning

Legend:

Secure scanning

Data transmission

Independent AI Radio for Secure
Scanning, Safeguarding
Wireless Network Security

Different from traditional, periodic, single-radio scanning with
blind spots, AI Radio performs independent, real-time, full-radio,
secure scanning.
The secure scanning does not occupy communication radio
resources or affect wireless performance, ensuring good
network experiences.

AI Radio

Traditional AP

Unified Cloud Management
Intelligent Tuning and Easier O&M

WIS Cloud Network enables network-wide configuration and tuning, removing the need of onsite commissioning.
It also supports O&M on the mobile app Wi-Fi Moho.
With early warning of network faults, wireless networks can be monitored anytime and anywhere.

Go to WIS ->

Cloud O&M

24h Network Optimization

Real-Time Warning

Fault Locating

Specifications

Hardware Specifications

Hardware Specifications	RG-AP880-AR
802.11n	Ten spatial streams ● Radio 1 – 2.4 GHz: 2x2 MIMO, two spatial streams ● Radio 2 – 5 GHz: 2x2 MIMO, two spatial streams ● Radio 3 – 5 GHz: 4x4 MIMO, four spatial streams ● Radio 4 – AI Radio, 2.4 GHz/5 GHz: 2x2 MIMO, two spatial streams Channels: ● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz ● Radio 2 – 5 GHz: 20 MHz and 40 MHz ● Radio 3 – 5 GHz: 20 MHz and 40 MHz ● Radio 4 – AI Radio, 2.4 GHz/5 GHz: 20 MHz and 40 MHz Combined peak data rate: 1.200 Gbps ● Radio 1 – 2.4 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15 ) ● Radio 2 – 5 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15) ● Radio 3 – 5 GHz: 6.5 Mbps to 600 Mbps (MCS0 to MCS31) ● Radio 4 – AI Radio, 2.4 GHz/5 GHz: AI Radio for scanning only Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, and 64-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF)
802.11ac	Eight spatial streams ● Radio 2 – 5 GHz: 2x2 MU-MIMO, two spatial streams ● Radio 3 – 5 GHz: 4x4 MU-MIMO, four spatial streams ● Radio 4 – AI Radio, 5 GHz: 2x2 MIMO, two spatial streams Channels: ● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz ● Radio 3 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz ● Radio 4 – AI Radio, 5 GHz: 20 MHz, 40 MHz, and 80 MHz Combined peak data rate: 5.200 Gbps ● Radio 2 – 5 GHz: 6.5 Mbps to 1.733 Gbps (MCS0 to MCS9) ● Radio 3 – 5 GHz: 6.5 Mbps to 3.467 Gbps (MCS0 to MCS9) ● Radio 4 – AI Radio, 5 GHz: AI Radio for scanning only Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, and 256-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF)
802.11ax	Eight spatial streams ● Radio 1 – 2.4 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams ● Radio 2 – 5 GHz: 2x2 uplink/downlink MU-MIMO, two spatial streams ● Radio 3 – 5 GHz: 4x4 uplink/downlink MU-MIMO, four spatial streams Channels: ● Radio 1 – 2.4 GHz: 20 MHz and 40 MHz ● Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz ● Radio 3 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz Combined peak data rate: 7.780 Gbps: ● Radio 1 – 2.4 GHz: 7.3 Mbps to 0.574 Gbps (MCS0 to MCS11) ● Radio 2 – 5 GHz: 7.3 Mbps to 2.402 Gbps (MCS0 to MCS11) ● Radio 3 – 5 GHz: 7.3 Mbps to 4.804 Gbps (MCS0 to MCS11) Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, and 1024-QAM Packet aggregation: ● Aggregate MAC Protocol Data Unit (A-MPDU) ● Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) WPA3
Antenna	Wi-Fi ● 2.4 GHz: two built-in omnidirectional smart antennas, with peak antenna gain of 5.5 dBi. ● 5 GHz: six built-in omnidirectional smart antennas, with peak antenna gain of 7 dBi. Bluetooth One integrated vertically polarized omnidirectional antenna, with peak antenna gain of 3 dBi.
Port	1 x 100/1000/2.5G/5GBASE-T port, in compliant with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++) 1 x 5GE SFP/RJ45 combo port, compatibility with 1GE and 2.5GE modules, shared with one 100/1000/2.5G/5GBASE-T port 1 x 10/100/1000BASE-T port,supplying 48 V/12.95 W power to an IoT unit 1 x RJ45 console port 1 x USB 3.0 (Type-A connector) 1 x Bluetooth 5.1
Status LED	1 x multi-color system status LED ● AP power-on status ● Software initialization status and upgrade status ● Uplink service interface status ● Wireless user online status ● CAPWAP tunnel timeout ● Specific AP locating
Button	1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 5 seconds. Then the device restores to factory settings.
Dimensions (W x D x H)	Main unit: 230 mm x 230 mm x 51 mm (9.06 in. x 9.06 in. x 2.01 in.) Shipping: 618 mm x 450 mm x 350 mm (24.33 in. x 17.72 in. x 13.78 in.)
Weight	Main unit: 1.0 kg (2.20 lbs) Mounting bracket: 0.1 kg (0.22 lbs) Shipping: 1.25 kg (2.76 lbs)
Mounting	Wall/Ceiling-mount (a mounting bracket is delivered with the main unit)
Lock option	Kensington lock and securing latch
Input power supply	The AP supports the following two power supply modes: ● 54 V DC/1.1 A power input over DC connector: The DC connector accepts the center-positive circular plug with the inner diameter of 2.1 mm (0.08 in.) or outer diameter of 5.5 mm (0.22 in.) and the length of 9.5 mm (0.37 in.). A DC power supply needs to be purchased independently. ● PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++). Note: If both DC power and PoE are available, DC power is preferred.
Maximum power consumption	Maximum power consumption: 40 W ● DC power: 40 W, Radio 1 (2.4 GHz) 2x2, Radio 2 (5 GHz) 2x2, Radio 3 (5 GHz) 4x4, Radio 4 (AI Radio) 2x2, LAN 2 for PoE supply (48 V/12.95 W), and USB port for power supply (5 V/5 W) ● 802.3bt (PoE++): 40 W, Radio 1 (2.4 GHz) 2x2, Radio 2 (5 GHz) 2x2, Radio 3 (5 GHz) 4x4, Radio 4 (AI Radio) 2x2, LAN 2 for PoE supply (48 V/12.95 W), and USB port for power supply (5 V/5 W) ● 802.3at (PoE+): 25 W, Radio 1 (2.4 GHz) 2x2, Radio 2 (5 GHz) 2x2, Radio 3 (5 GHz) 2x2, Radio 4 (AI Radio) 2x2, LAN 2 supports data transmission but does not provide PoE output. The USB port is disabled and does not supply power to external devices. ● 802.3af (PoE): 12.2 W, Radio 1 (2.4 GHz) 1x1, Radio 2 (5 GHz) 1x1, Radio 3 (5 GHz) 1x1, Radio 4 (AI Radio) is disabled, LAN 2 supports data transmission but does not provide PoE output. The USB port is disabled and does not supply power to external devices. ● Idle mode: 12.2 W
External power supply	When powered by 802.3bt (PoE++), the AP can supply power to an external device. ● The USB port can source 1 A/5 W power to an attached device. ● The LAN 2 port can source 48 V/12.95 W power to an IoT unit.
Environment	Storage temperature: –40°C to +70°C (–40°F to +158°F) Storage humidity: 5% RH to 95% RH (non-condensing) Storage altitude: –500 m to +5,000 m (–1640.42 ft. to +16,404.20 ft.) Operating temperature: –10°C to +50°C (14°F to 122°F) Operating humidity: 5% RH to 95% RH (non-condensing) Operating altitude: –500 m to +5,000 m (–1640.42 ft. to +16,404.20 ft.) Note: At an altitude in the range of 3,000–5,000 m (9842.52–16,404.20 ft.), every time the altitude increases by 166 m (544.62 ft.), the maximum temperature decreases by 1°C (1.8°F).
Mean Time Between Failure (MTBF)	200,000 hours (22 years) at the operating temperature of 25°C (77°F)
System memory	512 MB DRAM, 256 MB flash
Transmit power	2.4 GHz ● Maximum transmit power: 20 dBm (100 mW) ● Minimum transmit power: 7 dBm (5.01 mW) 5 GHz ● Maximum transmit power: 20 dBm (100 mW) ● Minimum transmit power: 9 dBm (7.94 mW) Note: ● Adjusting the transmit power by percentage (recommended) and in 1dBm increments. ● The transmit power adjusted in percentage. The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.

The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Radio Frequency Performance	RG-AP880-AR
Frequency Band and Protocol	Data Rate	Maximum Transmit Power per Transmit Chain	Maximum Receive Sensitivity per Receive Chain
2.4 GHz, 802.11b	1 Mbps	24 dBm	–96 dBm
	2 Mbps	24 dBm	–93 dBm
	5.5 Mbps	23 dBm	–90 dBm
	11 Mbps	22 dBm	–89 dBm
2.4 GHz, 802.11g	6 Mbps	24 dBm	–91 dBm
	24 Mbps	23 dBm	–85 dBm
	36 Mbps	23 dBm	–80 dBm
	54 Mbps	21 dBm	–74 dBm
2.4 GHz, 802.11n (HT20)	MCS0	24 dBm	–85 dBm
2.4 GHz, 802.11n (HT20)	MCS7	20 dBm	–67 dBm
2.4 GHz, 802.11n (HT40)	MCS0	24 dBm	–82 dBm
2.4 GHz, 802.11n (HT40)	MCS7	20 dBm	–64 dBm
2.4 GHz, 802.11ax (HE20)	MCS0	24 dBm	–85 dBm
2.4 GHz, 802.11ax (HE20)	MCS11	16 dBm	–58 dBm
2.4 GHz, 802.11ax (HE40)	MCS0	24 dBm	–82 dBm
2.4 GHz, 802.11ax (HE40)	MCS11	16 dBm	–54 dBm
5 GHz, 802.11a	6 Mbps	24 dBm	–91 dBm
	24 Mbps	23 dBm	–85 dBm
	36 Mbps	23 dBm	–80 dBm
	54 Mbps	21 dBm	–74 dBm
5 GHz, 802.11n (HT20)	MCS0	24 dBm	–85 dBm
5 GHz, 802.11n (HT20)	MCS7	20 dBm	–67 dBm
5 GHz, 802.11n (HT40)	MCS0	24 dBm	–82 dBm
5 GHz, 802.11n (HT40)	MCS7	20 dBm	–64 dBm
5 GHz, 802.11ac (VHT20)	MCS0	24 dBm	–88 dBm
5 GHz, 802.11ac (VHT20)	MCS9	18.5 dBm	–63 dBm
5 GHz, 802.11ac (VHT40)	MCS0	24 dBm	–85 dBm
5 GHz, 802.11ac (VHT40)	MCS9	18.5 dBm	–60 dBm
5 GHz, 802.11ac (VHT80)	MCS0	24 dBm	–82 dBm
5 GHz, 802.11ac (VHT80)	MCS9	18.5 dBm	–57 dBm
5 GHz, 802.11ax (HE20)	MCS0	24 dBm	–85 dBm
5 GHz, 802.11ax (HE20)	MCS11	16 dBm	–58 dBm
5 GHz, 802.11ax (HE40)	MCS0	24 dBm	–82 dBm
5 GHz, 802.11ax (HE40)	MCS11	16 dBm	–54 dBm
5 GHz, 802.11ax (HE80)	MCS0	24 dBm	–82 dBm
5 GHz, 802.11ax (HE80)	MCS11	16 dBm	–52 dBm
5 GHz, 802.11ax (HE160)	MCS0	24 dBm	–79 dBm
5 GHz, 802.11ax (HE160)	MCS11	16 dBm	–50 dBm

Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.

Software Specifications

Basic Functions

Basic Function	RG-AP880-AR
Applicable software version	RGOS11.9(6)W1B2 or later
WLAN
Maximum number of associated STAs	1,536 (up to 512 STAs per radio)
Maximum number of BSSIDs	48 (up to 16 BSSIDs per radio)
Maximum number of WLAN IDs	16
STA management	SSID hiding Band steering Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently. Remote Intelligent Perception Technology (RIPT) Intelligent load balancing based on the STA quantity, traffic, or band Intelligent STA identification technology Rate set settings
STA limiting	SSID-based STA limiting Radio-based STA limiting
Bandwidth limiting	STA/SSID/AP-based rate limiting
CAPWAP	IPv4/IPv6 CAPWAP Layer 2 and Layer 3 topology between an AP and an AC An AP can automatically discover the accessible AC. An AP can be automatically upgraded through the AC. An AP can automatically download the configuration file from the AC. CAPWAP through NAT MTU setting and fragmentation over CAPWAP tunnels Encryption over CAPWAP data channels Encryption over CAPWAP control channels
Data forwarding	Centralized and local forwarding
Wireless roaming	Layer 2 and Layer 3 roaming
Wireless locating	MU and TAG device locating
Security and Authentication
Authentication and encryption	Remote Authentication Dial-In User Service (RADIUS) EXEC authorization, specifying source IP addresses of RADIUS packets, supporting authentication of other vendors, and built-in authentication server PSK and web-based authentication QR code-based guest authentication, SMS-based authentication, and MAC authentication bypass (MAB) Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3-Enterprise, WPA3-Personal
Data frame filtering	Allowlist, static blocklist, and dynamic blocklist
WIDS	User isolation Rogue AP detection and containment
ACL	IP standard ACL, MAC extended ACL, IP extended ACL, expert-level ACL, and IPv6 ACL Time range-based ACL ACL based on a Layer 2 interface ACL based on a Layer 3 interface Ingress ACL based on a wireless interface Dynamic ACL assignment based on 802.1X authentication (used with the AC)
CPP	CPU Protect Policy (CPP)
NFPP	Network Foundation Protection Policy (NFPP)
Routing and Switching
MAC	Static and filtered MAC addresses MAC address table size: 2,048 Maximum number of static MAC addresses: 2,048 Maximum number of filtered MAC addresses: 2,048
Ethernet	Jumbo frame length: 1,518 Full-duplex and half-duplex modes of interfaces IEEE802.1p and IEEE802.1Q Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP)
VLAN	Interface-based VLAN VLAN Group (dynamic VLAN assignment based on the MAC address and 802.11 key) Maximum number of SVIs: 200 Maximum number of VLANs: 4,094 VLAN ID range: 1–4,094
ARP	ARP entry aging, gratuitous ARP learning, and proxy ARP Identification of IP address conflicts between downlink users Maximum number of ARP entries: 2,048 ARP check
IPv4 services	Static and DHCP-assigned IPv4 addresses Number of IPv4 addresses set for each Layer 3 interface: 200 NAT, FTP ALG and DNS ALG
IPv6 services	IPv6 addressing, Neighbor Discovery (ND), IPv6 ND proxy, ICMPv6, IPv6 ping IPv6 DHCP client Number of IPv6 addresses set for each Layer 3 interface: 400
IP routing	IPv4/IPv6 static route Maximum number of static IPv4 routes: 1,024 Maximum number of static IPv6 routes: 1,000
Multicast	Multicast-to-unicast conversion
VPN	PPPoE client IPsec VPN
Network Management and Monitoring
Network management	NTP server and NTP client SNMPv1/v2C/v3 Fault detection and alarm Information statistics and logging
Network management platform	Web management (Eweb)
User access management	Console, Telnet, SSH, TFTP, and FTP
Switchover among Fat, Fit, and cloud modes	When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet mode. When the AP works in cloud mode, it can be managed through Ruijie Cloud.

Value-added Software

The following value-added software functions can be achieved with the WIS solution (used with RG-iData-WIS and wireless controller).

Value-added Software	RG-AP880-AR
Intelligent O&M
Experience	Network operation analysis, such as device stability and signal coverage Measuring users' network experience based on indicators such as the latency, packet loss, signal strength, and channel utilization, and visualizing results of the network experience Statistics on the number of online and offline failures of STAs associated with different APs, average signal strength, and other parameters VIP monitoring and alarm, and custom alarm thresholds STA global experience map and experience coverage evaluation based on the time range STA access protocol replay and fine-grained STA fault diagnosis Note: To support the preceding functions, ensure that the AP works in Fit mode.
Network optimization	Network performance optimization, including one-click network optimization and scenario-based optimization Client steering to cope with roaming stickiness, and experience indicator comparison Client steering to cope with remote association, and experience indicator comparison One-click diagnosis – analyzing problems and providing suggestions
Big data	Baseline analysis – recording the configuration, version, and other changes, and tracking network KPI changes Time capsule – analyzing the device version and configuration change history
Regional analysis	Batch generation of building floor information – uploading floor plans, and dragging and dropping AP positions
One-click report	One-click health report – generating a report on the overall operation of a network
Security radar	Unauthorized Wi-Fi signal location, presentation by category, and containment
Cloud Management
Management and maintenance	Uniformly connecting, managing, and maintaining APs, ACs, and other devices, batch device configuration and upgrade, and other functions Deployment through Zero Touch Provisioning (ZTP) – creating configuration templates and automatically applying configured templates One-click discovery of the wired and wireless network topology and topology generation
Cloud Authentication
Authentication mode	SMS authentication, fixed account authentication, one-click authentication, Facebook authentication, Instagram authentication, voucher authentication, and other authentication modes Authentication implemented in the cloud, without the need to deploy the local authentication server
Customized portal	Customized Portal authentication page for mobile phones and PCs
SMS gateway	Interconnection with SMS gateways of GUODULINK and Alibaba Cloud
Platform Capabilities
Big data capabilities	Mainstream persistence solutions based on Hadoop, MongoDB, and MySQL, providing distributed storage capabilities Spark-based big data computing capabilities Data warehouse building based on Hive, and data model conversion, integration, and other functions
Hierarchy and decentralization	Authorizing different applications for different users to meet service needs of different departments Granting operation permissions to administrators in different scenarios
System management	Account operation, authorization configuration, email configuration, configuration backup, exception alarms, and other system management functions

Note: For details, refer to the latest hybrid cloud management solution.

Regulatory Compliance

Regulatory Compliance	RG-AP880-AR
Regulatory compliance	EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, EN 301 489-1, EN 301 489-3, EN 301 489-17, EN 300 328, EN 301 893, EN 300 440, FCC Part 15, EN IEC 62311, IEC 62368-1, and EN 62368-1

* For more country-specific regulatory information and approvals, contact your local sales agency.

Resources All Resources

Learn about Products or Solutions

Software and Configuration

Order Information

Model

Description

RG-AP880-AR

802.11ax-compliant indoor high-density wireless access point

Quad-radio, ten spatial streams, peak data rate of 7.780 Gbps

Radio 1: 2.4 GHz: two spatial streams, 2x2 MIMO, peak data rate of 574 Mbps

Radio 2: 5 GHz: two spatial streams, 2x2 MU-MIMO, peak data rate of 2.402 Gbps

Radio 3: 5 GHz: four spatial streams, 4x4 MU-MIMO, peak data rate of 4.804 Gbps

Radio 4 (AI Radio): 2.4 GHz/5 GHz: two spatial streams, 2x2 MIMO, for scanning only

802.11a/b/g/n/ac/ax, switching between Fat, Fit, and cloud modes, and 802.3af/at/bt PoE and local DC power supply

Note:

The power source equipment (PSE) needs to be purchased separately.

The DC power supply needs to be purchased separately, and the output voltage/current must be 54 V/1.1 A.

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Education

5-Star Hotel Solution