Picture

RG-S6120-20XS4VS2QXS 24-Port 10GE Layer 3 Managed Core and Aggregation Switch (with Four 25G SFP28 Ports, Backward Compatible with 10G), 40G Uplink

A Red Dot Design Award winner. Recommended core or aggregation switch for small and medium-sized enterprise deployment.

Models

RG-S6120-20XS4VS2QXS

20 x 10G,4 x 25G,2 x 40G

Seri

RG-S6120 Series

Datasheet Sales Enquiry

Fitur Penting

Rich port types, 20 x 10G SFP+ ports,4 x 25G SFP28 ports, and 2 x 40G QSFP+ ports for uplink
VSU virtualization, flexible networking and high performance
Hardware redundancy, guaranteed service continuity and network connectivity
Network security policies and real-time monitoring, delivering enhanced network robustness
Abundant QoS policies for flexible resource allocation, congestion is a thing of the past
Multiple management modes, simple and easy maintenance

Spesifikasi Penting
Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Spesifikasi Penting View More

Features

Layer 3 All-Optical 10G Core & Aggregation Switch
RG-S6120-20XS4VS2QXS

Recommended aggregation switch for large-sized networks, or core switch for small and medium-sized networks. With 20 x 10G SFP+ ports and 4 x 25G SFP28 ports, the switch provides flexible access capabilities. The 2 x 40G QSFP+ uplink ports deliver high-speed uplink connectivity, fully satisfying the requirements of high-performance networks.

VSU Virtualization, Flexible Networking and High Performance

Millisecond Failover

High Scalability

Simplified Networking

The VSU connects to peripherals through an aggregate link, realizing service switching in milliseconds upon a failure.

VSU virtualization technology is supported to increase bandwidth through link aggregation, which greatly improves forwarding capabilities of the switch.

Multiple physical switches can be virtualized into one logical unit to simplify network configuration and architecture, eliminating loops, and improving reliability.

Hardware Redundancy, Guaranteed Service Continuity
and Network Connectivity

Hot-Swappable Power Modules + Intelligent Fan Modules

Hardware-Level Boot Redundancy

Optical Port Fault Isolation

Power modules can be replaced without affecting device operation. Intelligent fan speed regulation is supported for efficient cooling,
providing dual protection for the network.

Two Flash chips are used to store the system boot program for hardware-level boot redundancy, avoiding device failure caused by a failed Flash chip.

The innovative isolated chip design ensures that short-circuit current cannot reach the power supply chip directly. Failure of one optical module will not affect the normal operation of other optical ports, thus effectively ensuring service stability.

Network Security Policies and Real-Time Monitoring, Delivering Enhanced Network Robustness

CPP

NFPP

CPP protects the CPU from data attacks to ensure CPU stability under high usage, achieving significant improvement in the device's security performance.

Abundant QoS Policies for Flexible Resource Allocation,
Making Congestion a Thing of the Past

With multi-plane flow classification and control capabilities for MAC flow, IP flow and application flow, accurate resource allocation for multi-service traffic makes congestion a thing of the past, delivering high-quality networks.

Managed by the INC Controller to Achieve Easy and Efficient O&M Management

The switch automatically completes registration and
configuration after it accesses the all-optical network, achieving
plug and play, no commissioning and fast onboarding.

A switch can be flexibly replaced based on service needs
without reconfiguration. Service ports supports auto-sensing,
achieving automatic O&M.

Fast Onboarding

Zero Touch Replacement

Specifications

Hardware Specifications

Hardware Specifications	RG-S6120-20XS4VS2QXS
Interface Specifications
Fixed por	20 x 1G/2.5G/10G SFP+ ports, 4 x 10G/25G SFP28 ports, 2 x 40G QSFP+ ports One switch provides a maximum of 32 x 10G ports, 2 modular power slots, and 2 modular fan slots.
Fan module	2 x pluggable fan modules, and fan speed regulating and alarm function
Power modules	2 x power module slots
Fixed management ports	1 x MGMT port, 1 x console port, and 1 x USB 2.0 port
System Specifications
Packet forwarding rate	570 Mpps
System switching capacity	760 Gbps
Number of MAC addresses	Number of global MAC addresses: 32,768 Number of static MAC addresses: 1,000
ARP table size	16,000
ND table size	4,000
Number of IPv4 unicast routes	16,000
Number of IPv4 multicast routes	4,000
Number of IPv6 unicast routes	16,000
Number of IPv6 multicast routes	2,000
Number of ACEs	Maximum number of ingress ACEs associated with an SVI, physical interface, or aggregate interface: 2,500 Maximum number of egress ACEs associated with an SVI, physical interface, or aggregate interface: 1,000
Number of VSU members	2
Number of IGMP groups	4,000
Number of MLD groups	1,024
Number of VRFs	100
Dimensions and Weight
Dimensions (W x D x H)	442 mm × 330 mm × 43.6 mm (17.40 in. x 12.99 in. x 1.72 in.), 1 RU
Weight (full load)	5.7 kg (12.57 lbs)
CPU and Storage
CPU	1.25 GHz ARM processor
Storage	Flash memory: 1 GB
Data packet buffer	4MB
Power and Consumption
Maximum power consumption	< 85 W
Rated input voltage	RG-PA150I-F: AC input: Rated voltage range: 100–240 V AC; 50/60 Hz Rated input current: 3 A HVDC input: Rated voltage: 240 V DC Rated current per circuit: 3 A RG-PD150IB-F： DC input: -48 V DC to -60 V DC
Maximum input voltage	RG-PA150I-F: AC input: 90–264 V AC; 47/63 Hz HVDC input: 192–288 V AC RG-PD150IB-F： DC input: -36 V DC to -75 V DC
Environment and Reliability
MTBF	> 200,000 hours
Primary airflow	Front-to-rear airflow
Operating temperature	0°C to 50°C (32°F to 122°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	10% to 90% RH (non-condensing)
Storage humidity	5% to 90% RH (non-condensing)
Maximum operating altitude	5000 m (16404.20 ft.)
Operating noise	< 78 dB
Interface surge protection	Power module: 6 kV

Software Specifications

RG-S6120-20XS4VS2QXS
Feature	Description
Ethernet Switching	Jumbo frame (maximum length: 9,216 bytes)
	IEEE 802.1Q (supporting 4K VLANs)
	Maximum number of VLANs that can be created: 4,094
	Voice VLAN
	Super-VLAN and private VLAN
	MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment
	GVRP
	Basic QinQ and selective QinQ
	STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
	ERPS (G.8032)
	LACP (IEEE 802.3ad)
	LLDP/LLDP-MED
IP Service	Static and dynamic ARP
	DHCP server, DHCP client, DHCP relay, and DHCP snooping
	DNS
	DHCPv6 Client, DHCPv6 relay, and DHCPv6 snooping
	Neighbor Discovery (ND) and ND snooping
IP Routing	Static routing
	RIP and RIPng
	OSPFv2 and OSPFv3
	GR
	IS-IS
	BGP4 and BGP4+
	BGP4 and MP-BGP
	Equal and Weighted Cost Multi-Path (ECMP)
	IPv4/IPv6 VRF
	IPv4/IPv6 PBR
Multicast	IGMPv1/v2/v3 and IGMP proxy
	IGMPv1/v2/v3 snooping
	IGMP filtering and IGMP fast leave
	PIM-DM, PIM-SM, and PIM-SSM
	PIM-SSM for IPv4 and IPv6
	MLDv1/v2
	MLDv1/v2 snooping
	MSDP
	PIM-SMv6
	Multicast source IP address check Multicast source port check Validity check of IGMP packets
	Multicast querier
ACL and QoS	Standard IP ACLs (hardware ACLs based on IP addresses)
	Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)
	Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)
	Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	Time-based ACLs
	ACL80 and IPv6 ACL
	Applying ACLs globally (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)
	ACL redirection
	Port traffic identification
	Port traffic rate limiting
	802.1p/DSCP/ToS traffic classification
	Traffic classification based on 802.1p priorities, DSCP priorities, and IP precedences
	Traffic classification based on ToS values
	Congestion management: SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ
	Congestion avoidance: tail drop, RED, and WRED
	Eight queues on each port
	Rate limiting in each queue
Security	AAA
	RADIUS and TACACS+
	Filtering of invalid MAC addresses Broadcast storm suppression Hierarchical management of administrators and password protection BPDU guard
	RADIUS authentication and authorization
	Port- and MAC address-based 802.1x authentication
	IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication
	Web authentication
	Hypertext Transfer Protocol Secure (HTTPS)
	SSHv1 and SSHv2
	ICMPv6
	IPv6 addressing and Path MTU Discovery
	Port security
	IP source guard
	SAVI
	ARP spoofing prevention
	CPP and NFPP
	Various attack defense functions including NFPP, ARP anti-spoofing, DHCP/DHCPv6 attack defense, ICMP attack defense, ND attack defense, IP scanning attack defense, and customizing attack defense packet types
	Loose and strict RPF uRPF ignoring default routes
Reliability	REUP
	Rapid Link Detection Protocol (RLDP), Layer 2 link connectivity detection, unidirectional link detection, and VLAN-based loop control
	Data Link Detection Protocol (DLDP)
	IPv4 VRRP v2/v3 and IPv6 VRRP
	BFD
	GR for RIP, OSPF, BGP, and other routing protocols Power modules in 1+1 redundancy mode Hot swapping of power modules and fan modules
Device virtualization	VSU
NMS and maintenance	SPAN, RSPAN, and ERSPAN
	sFlow
	NTP, SNTP, and NTP for IPv6
	FTP and TFTP FTP/TFTP v6
	SNMP v1/v2/v3 SNMP over IPv6
	RMON (1, 2, 3, 9) Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups RMON used to implement Ethernet statistics, historical statistics, and alarm functions
	NETCONF
	Flow-based mirroring, and N:1 and 1:N port mirroring
	CWMP
	gRPC
	OpenFlow Special 1.3 Flow table analysis defined by all protocols Transmission of specified packets to the controller Configuring the controller's IP address and port Notifying port status changes to the controller
	CLI (Telnet/console) Syslog IPv6 MIB support for SNMP Telnet v6 Traceroute v6 DNS v6

Note: The item marked with the asterisk (*) will be available in the future.

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Installation

Installation Guide

Software and Configuration

Configuration Guide

Order Information

Switches and Power Modules

Model	Description
RG-S6120-20XS4VS2QXS	20 x 1G/2.5G/10G SFP+ optical ports, 4 x 10G/25G SFP28 optical ports, and 2 x 40G QSFP+ optical ports, and up to 32 10G ports 2 x power module slots (at least one RG-PA150I-F power module needs to be configured) 2 x fan module slots (the device is equipped with two fan modules upon delivery)
RG-PA150I-F	150 W AC power module that applies to the RG-S6120-20XS4VS2QXS
RG-PD150IB-F	Power module (support redundancy, DC, 150W ,10 A)

GE Optical Module

Model	Description
Mini-GBIC-GT	1000BASE-GT mini GBIC module
MINI-GBIC-SX-MM850	1000BASE-SX, SFP transceiver, SM (850 nm, 500 m, LC).
MINI-GBIC-LX-SM1310	1000BASE-LX, SFP transceiver, SM (1310 nm, 10 km, LC)
MINI-GBIC-LH40-SM1310	1000BASE-LH, SFP transceiver, SM (1310 nm, 40 km, LC)
MINI-GBIC-ZX80-SM1550	1000BASE-ZX80, SFP transceiver, SM (1550 nm, 80 km, LC)
GE-SFP-LX20-SM1310-BIDI	SFP BIDI Transceiver-TX1310/RX1550, 20 km, LC
GE-SFP-LX20-SM1550-BIDI	SFP BIDI Transceiver-TX1550/RX1310, 20 km, LC
GE-SFP-LH40-SM1310-BIDI	SFP BIDI Transceiver-TX1310/RX1550, 40 km, LC
GE-SFP-LH40-SM1550-BIDI	SFP BIDI Transceiver-TX1550/RX1310, 40 km, LC

2.5GE Optical Module

Model	Description
2.5G-SFP-LX03-SM1310-BIDI-I	SFP 2.5G BIDI Transceiver-TX1310/RX1550，3km，LC
2.5G-SFP-LX03-SM1550-BIDI-I	SFP 2.5G BIDI Transceiver-TX1550/RX1310，3km，LC

10GE Optical Modules

Model	Description
XG-SFP-SR-MM850	10GE LC connector module, applicable to the SFP+ port 62.5 μm/125 μm: 33 m 50 μm/125 μm: 66 m Modal bandwidth of 2000 MHz·km for a link length of up to 300 meters
XG-SFP-LR-SM1310	10GE LC connector module with a link length of up to 40 km, 1310-nm wavelength, applicable to the SFP+ port
XG-SFP-ER-SM1550	10GE LC connector module with a link length of up to 40 km, 1550-nm wavelength, applicable to the SFP+ port
XG-SFP-AOC1M	10GE SFP+ port cable, 1 m, including one cable and two interface modules
XG-SFP-AOC3M	10GE SFP+ port cable, 3 m, including one cable and two interface modules
XG-SFP-AOC5M	10GE SFP+ port cable, 5 m, including one cable and two interface modules

25G Optical Modules

Model	Description
VG-SFP-SR-MM850	25GE SR, SFP28, 850-nm wavelength, 100 m over MMF
VG-SFP-LR-SM1310	25GE LR, SFP28, 1310-nm wavelength, 10 km over SMF
VG-SFP-AOC5M	25GE SFP+ active optical cable, 5 m, including two modules

40G Optical Modules

Model	Description
40G-QSFP-SR-MM850	40GE SR, QSFP+ transceiver, applicable to QSFP+ ports OM3 and OM4 MMF, MPO, 8-core, 850-nm wavelength, 100 m over OM3 MMF or 150 m over OM4 MMF
40G-QSFP-LR4 SM1310	40GE LR4, QSFP+ transceiver, LC, 1310-nm wavelength, 2-core, 10 km over SMF, applicable to QSFP+ ports
40G-AOC-5M	40GE QSFP+ active optical cable, 5 m, including one cable and two interface modules
40G-AOC-10M	40GE QSFP+ active optical cable, 10 m, including one cable and two interface modules

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.